Hi User_51
Thanks for sending the link. I have managed to get the modifiers working and it did the job :). Thanks a million. Just before I sent it to printer Bambu Studio crashed though!. I keep having this. I am using 2018 macbook pro…
Thanks again
I purchased the A10, but quickly figured out I didn’t want to learn to fly with that. so I also got their QTrainer. It is an older, and does NOT come with bambu profile, nor does it print vase mode. BUT the a 10 does (both bambu, some files vase, some not.) From that I gathered. 1. Even-Odd mode. 2 0% infill, 3. outer-inner(both work, but outter0inner looks better). And they recomend adding an extra wall or 2. to the bottom. so 4. add a modifier to add an extra parameter. However… I was NOT about to figure out why the alignment tabs were so weak. the broke off with the slightest touch. making them useless. I ended up modifying my files. I ran a tube the length of each file, such that they lined up. Cut a piece of filament to length. run it through the tube. It aligned the parts perfectly, every time. This made for WAY easier assembly/gluing. I also sliced it with a sold layer on top, and bottom. Made for way easier gluing.
oh, and 5 walls to 1. 6 top layers to 0, 7 bottom layers to 0 (except where I later changed that for better gluing)