AMS wire connector data

Anybody knows what are the pins out in AMS.

I bought the cable, and I would like to know if can can split it out and connect it to external LED and additional fan.

2 Likes

I did. Not experienced any problems so far.

you have any data what is what. Do not like to poke into it and do a short-circuit.

-if we look at my picture (the pins form left to right)
1/2/3
4/5/6

1=?
2=?
3=?
4=?
5=?
6=?

2 Likes

This is LED unit I used. There is a link in it to a YouTube video showing how the author got the power. I found a link with the pinout for the plug somewhere, but can’t remember. After you cut the cable and expose the wires, you will need to check which wire goes to which pin.

https://www.printables.com/model/280168-bambu-lab-x1-led-light-frame

1 Like

Found the link with the pinout infomation.

https://wiki.bambulab.com/en/x1/troubleshooting/ams-power-failure

1 Like

thank you very much for this. I thought that I saw something similar, but did not find it after that.

Thanks, nice information, I will suppose they can handle a bit of power (at least enought for LED I hope) are they are made to power four AMS