AMS2/AMS/AMS HT with A1

Bambu Lab A Series General Discussions
1

Hi guys, I’m wondering if someone else has the same issue that I’m having.
I’ve switched the AMS type on the printer and connected my AMS2 Pro to it. Everything went well, the AMS2 Pro is recognized.

When I went to BambuStudio and synced the printer, it showed AMS lite for the AMS type. However, in the window, an AMS is clearly pictured down below. See pictures:

IMG_7715
IMG_77151134×2016 471 KB

IMG_7710
IMG_77101134×2016 251 KB

And when I go to the drop down menu in the slicer and select "AMS/AMS2 Pro/AMS HT), it switched to the AMS lite type on the printer, but showed an image of the AMS lite in the window.

IMG_7708
IMG_77081134×2016 200 KB

That said, I decided to just ignore this mix-up and printed something and faced no issues.

My A1 has the latest firmware installed and my Bambu Studio version: 2.3.1.51, also the latest one.

2

Hi, I’m also interested on this topic because tomorrow my brand new A1 will arrive with my brand new AMS2Pro…just a question: did you install the latest official firmware (released last week if I’m not wrong) or are you still running with the old beta version?

3

the firmware on the A1 is the Version 01.07.00.00, should be the latest one (not the beta :slight_smile:

printing works just fine, it’s just bothers me that the AMS type isn’t correctly shown in the slicer, and therefore the estimated printing time also isn’t correct (it would take slightly longer to print with the AMS2/AMS)

4

Yes, I understand…maybe it’s “just” a bug they have to fix on Bambu Studio…or at least I hope so :sweat_smile:
I’m really looking forward to have both of them on my hands!