Bambu P2S keeps switching to heating mode

Bambu Lab Software Feature Requests
1

I have been trying my hand at printing with PHA. I’m using a P2S.

Unfortunately for whatever reason the P2S keeps switching from cooling mode to heating mode; and it’s very frustrating; especially as you can’t change it once a print starts, meaning I have to leave the glass top and door open and its noisy etc…

Please look at setting a heating or cooling mode setting within the filament itself, or allowing the heating/cooling mode to be changed during printing.

Cheers.

2

ok, so for anyone having this issue; the problem is that setting the softening temperature to anything greater than 50 starts the chamber heating mode; I had copied settings from another user where softening temperature was 120, and this was causing it to switch into heating mode. Would be nice if there was an explicit setting or if setting the material type to PHA automatically enabled the cooling mode.