I tried all of their suggestions but it didn’t get rid of that shift. Basically what I’ve observed is that this happens when you have a floor surface and when it gets to the walls above that surface, that is when the layer shift is really noticable.
My workaround:
I make my floor area very dense (40-60% infill using modifier on the floor portion. or you can set entire model with that high infill percentage if you wanted to) or I make the floor a completely solid floor (increasing bottom shell layers). And I also set arachne and outer/inner. Those settings gets rid of that layer shift.
These photos without the layer shift have very dense infill (yellow) and other has solid floor (bottom shell layers = 11). Also set to use arachne and outer/inner. This has been my solution, no layer shift.