Does firmware v01.02.00.00 blocks the FTP access to the filesystem?

Bambu Lab P Series Bambu Lab P2S
1

Hi, good night,

I recently update to v01.02.00.00 and realised that the FTP connection to the filesystem is gone…

On version 01.01.03.00 I was able to access to the printer.

image
image440×225 5.15 KB

image
image413×128 2.72 KB

But with version 01.02.00.00
It is raising errors all the time, non of the ftp/sftp options works.

image
image547×519 23.3 KB

Have someone the same problem?

Thanks you so much in advance.

2

If it’s not the password of your printer that has changed, might be the certificate. Delete your connection and re-create it, you will get the certificate pop-up again, accept it, see if it’s resolved

3

Ok, the problem is that the printer do not manage correctly the FTP connections, the FTP server is crashing.

I think, because the logs are encrypted and can’t check them…

You need to turn off and on the printer… damm it.

Versión 01.01.03.00 is more stable than this one.I’m going to downgrade.

Rabbit

1 Like
4

Are you sure the printer is still on the same IP address and hasn’t had DHCP assign a new one?

5

Hi good morning,

Indeed, the IP is bind to the mac so always is the same.

1 Like
6

Just wildly throwing this out since this is something I don’t do. Did you try port 22 (SFTP) instead of 21?

1 Like
7

Thanks a lot, yes… one of many in the 22, but that port for bambulab is not admited.

As i commented previously, the issue is that the bambu firmware/os(01.02.0.0) ftp server is crassing, and it recovers when the printer is restarted… do not last to much.

Version 01.01.03 keeps ftp connections flawlesly

Thanks a lot for your comments.

1 Like