Can anyone help with an ongoing issue I’ve now tried this print 4 times and each time I’m getting the same outcome not always in the same area. The info on the screen indicates 0.2mm layer 2 walls 15% infill nozzle temp 220c bed temp 55c. The print starts well then the first sign of issue is hearing the raised failed print. The printer is a standard p1s with the AMS 2 pro filament is eSun pla lite I’ve never changed the stock settings. The build plate is a Bambu smooth that is cleaned between prints and up until this print I’ve not had any recent issues. I’ve been producing good Xmas decorations with this same filament without issue. The filament has been dried in the AMS.
