First layer issue: same print, settings, & bed cleaning; new filament roll

[JonRaymond]

@bennyhana

I just assumed that filament delivered straight from the factory would be properly dried

If you look into how filament is made you will see that generally it is pulled through a water bath after being extruded to cool it so it can be spooled. I haven’t heard of any manufacturing that claims to dry filament after extruding and before packaging.

Example: Time stamp 4:15

@bennyhana

I’ll guess I’ll wait to use the filament until my filament dryer is delivered later this week.

You can also dry filament using the printer bed.

Filament Drying Feature on P1S

You can still dry filament on the P1S, you just have to set it manually. If you do not have a X1 series printer but have a P1S printer that also has a closed chamber, you can also dry the filaments by setting the bed temperatures to be the same as a X1 series printer‘s, and the operation during the drying process is the same. [不同耗材烘干条件en]