Unfortunately there will be a bit of a smell. This is just part of printing ABS/ASA. Some brands are better than others.
Yes the printer has a carbon filter but there are several issues.
A. It isn’t enabled by default.
Once enabled you can adjust its operation in Filament Settings
B. Enabling the “Exhaust” fan during printing of ABS/ASA will decrease the camber temperature as it draws in cooler outside air. The problem with this is that it can cause part warping and adhesion issues.
If the smell really bothers you can print/buy a “BentoBox” which is a similar carbon filter but it recirculates the air inside the chamber instead of exhausting it.