Flush volumes auto calculating to zero with support filament

[CanDo]

I replied to your other post here, with some images to illustrate:

Print mixed primary filament with support

If 1.00 is entered in the multiplier field and then re-calculate pressed, the table will update. In the image below: Spool 1 is grey PETG and spool 4 is orange PLA Tough. The values for the cells in column 1/row 4 and column 4/row 1 have been manually edited to 800 for maximum flushing when printing a PLA Tough part with PETG as the support. Spool 2 and 3 are not used for this print so the flushing values are irrelevant. I find this easier than using the multiplier. [image]