Looks like they were commenting on the “free P2S”
Basically a confirmation now
A confirmation of what? The OP may receive a free P2S?
Makerworld said “some surprises” so I assume it’s gonna be a lot more than getting P2S off makerworld points (or maybe the P2S is a raffle giveaway? idk what they mean by “free” cuz they’ve given out “free” 3D printers in several ways)
I expect there to be at least 2 of the 5 leaked products to be released this year based off “some”.
They weren’t, it’s quite obvious they replied to me as shown by my handle tag.
Formnext starts November 17th, I’m pretty sure there will be a release there, seeing as it was also when they unveiled the h2c last year
3 is for 3rd gen I believe
Bambu Lab N10:
- Build Volume: 330mm x 320mm x 325mm
- Extruders: 1
- Nozzles: 9
- Max Nozzle Temperature: 320°C (Derived from profiles; Likely higher)
- Max Build Plate Temperature: 110°C (Derived from profiles, Possibly higher)
- Max Chamber Heater Temperature: 65°C (Derived from profiles, Possibly higher)
- Max Toolhead Speed: 1.400mm/s
- Max Toolhead Acceleration: 25.000 mm/s²
Bambu Lab N11:
- Build Volume: 256mm x 256mm x 260mm
- Extruders: 1
- Nozzles: 7
- Max Nozzle Temperature: 320°C (Derived from profiles; Likely higher)
- Max Build Plate Temperature: 110°C (Derived from profiles, Possibly higher)
- Max Chamber Heater Temperature: 65°C (Derived from profiles, Possibly higher)
- Max Toolhead Speed: 1.400mm/s
- Max Toolhead Acceleration: 25.000 mm/s²
HMS 1A00-0900-0001-0058: Anomaly detected while placing hotend 9: Hotend 9 fell from the holder.
If they can make an active chamber heated tool changer I will be jealous. Still… I don’t see it being a big enough upgrade from an h2c.
I wish guerilla marketing would go the way of the dinosaur. For a Chinese company they sure do adopt some of the more irritating American behaviors.
Edit: The drip feed announcements are also annoying. Watch it take 8 announcements to debut 2 printers.
Yes… then again they have not announced a founders edition yet or have they?
Ah yes I see now the posts are NOT displayed in chronological order for some insane reason. Maybe I am too old for social media.
What are the N10 and N11? Model numbers? (Never mind, Number 10 and 11)
Yeah when I first joined MakerWorld I realized that and it’s incredibly confusing 
Is this the translated version of the patents?
N10 and N11 sound like legit Bambu internal code names. Size of 330mm x 320mm x 325mm would imply the nozzle rack will be in the same location as H2C on the right side of the build plate.
I thought the same exact thing, not just a plain random description, but real features from inside.
