Product Request
Hardened, or better yet tungsten carbide, versions of 0.2mm nozzles.
See picture for reason.
This is a new 0.2mm for P1S next to the used nozzle it will be replacing. Since installation the previous nozzle has printed several small aesthetic models, and a total of less than half a dozen spools of PLA. No CF and no glow in the dark, 1/2 - 2/3 of it was plain duramic white PLA+ and some of it was Bambu Matte White PLA (the latter is especially abrasive).
From my experience the 0.2mm nozzles wear down especially quickly even with standard (non-CF/non-glow) pla types.