Bambu Lab AMS 2 Pro
AMS, Evolved.
The all-new 2nd-generation AMS 2 Pro features more powerful feeding motors that significantly boost filament feeding efficiency, accelerating multi-color and multi-material printing. Even better, the AMS 2 Pro introduces a filament drying function with active air vent on a fully sealed system, greatly enhancing drying efficiency and maintaining optimal filament conditions for extended periods.
Engineered To Better Dry & Use High-performance Filaments
Faster multi-color printing
The powerful Bambu permanent magnet synchronous servo motor accelerates filament feeding by 60% for enhanced efficiency.
Fast filament drying & air-tight filament storage
Automated venting facilitates dehumidification during drying and ensures airtight sealing for weeks of high-quality printing.
Serial connect up to 4 AMS 2 Pro & 8 AMS HT, total of 24 filaments
Supports multi-material and 24-color printing capabilities.
Key Features
Up to 65°C drying temperature
Provides effective drying for many filament types.
60% faster feeding speed
The brushless motor significantly improves feeding efficiency.
Auto-rotate Drying
During the drying process, the filament spools rotate automatically to ensure more even drying.
RFID Sync
AMS 2 Pro uses RFID to auto-match drying settings for Bambu official filaments, no manual input needed.
Speed Up! Faster Multi-material Printing!
Saves an average of 10 minutes per 100 filament changes.
Evolved, Polished Design Details
Easy-access Filament Tubes
See-through filament guide rails and a quick-release feeding mechanism make removing stuck filament quicker and easier.
Ceramic Inlet
Ceramic filament inlet, offering increased durability.
Accurate Temp/Humidity Sensor
Accurate temperature and humidity sensor for clearer readings.
Compatible With All Bambu Lab Printers
The AMS 2 Pro is compatible with all Bambu Labs products.
Specifications
Dimensions: 372 × 280 × 226 mm³
Net Weight: 2.5 kg
Housing Material: ABS/PC
Filament Supported:
PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF/PAHT-CF/PETG-CF/Support for PLA/PETG, and TPU for AMS
Filament Not Supported:
TPE, generic TPU, PVA (damp), BVOH (damp), Bambu PET-CF/TPU 95A, and other filament that contains carbon fiber or glass fiber
Filament Diameter: 1.75 mm
Spool Dimension:
- Width: 50 mm-68 mm
- Diameter: 197 mm-202 mm
RFID Identification: Supported
Highest Drying Temperature: 65°C
Filament Supported for Drying:
PLA, PETG, Support for PLA/PETG, ABS*, ASA*, PET*, PA*, PC*, PVA*, BVOH*, PP, POM*, HIPS*, Bambu PLA-CF*/PAHT-CF*/PETG-CF*, and TPU for AMS*
*Filaments marked with * require higher drying temperature. The AMS 2 Pro cannot dry them completely. If you want better drying performance for these filaments, we recommend purchasing an AMS HT.
Power Input: 24 V 4 A