High temp plate bubbling immediately

Bambu Lab X1 Series
4

Thanks for sharing this. The recommendation wouldn’t be to wait overnight as it’s a long period and would not help too much.

Here is what is our recommendations for solving the problem:

  1. Place the Cool Plate face down on the heated bed, with the Engineering side on top.
  2. Set the bed temperature to 100C and wait for 5-10 minutes
  3. Set the temperature to 30C and wait until the bed cools down to that temperature
  4. Remove the plate and inspect it, to see if the bubbles are removed.

This should help solve the bubbles on the plate.

2 Likes