Hallo zusammen,
ich habe nun mit meinem X1c 1.300h auf der Uhr.
Meist PLA, PETG und ABS/ASA.
Vieles im Prototypen-Style bzw. selbst erstellte Kleinigkeiten.
Aber auch viele Remix-Arbeiten.
Mittlerweile habe ich:
2 Abdeckkappen für den Extruder neu, da sich die Magnete immer wieder lösen,
1 Neues Druckbett, das aber immer noch krumm ist.
Mittlerweile auch schon die zweite 0,4 mm Düse, da die erste einfach fertig war.
Ich bin immer noch sehr zufrieden mit dem X1c und auch mit den Support durch BL, denn auch wenn es mal länger dauert, es wurde mir immer geholfen.
Es stimmt schon, wenn man mit den BL Mitarbeitern so redet, wie man selbst auch angesprochen werden möchte, dann klappt das.
Denn die Supportmitarbeiter können nichts für einzelne oder Serienprobleme.
Grüße aus dem Norden von Deutschland,
Hello everyone,
I now have 1,300 hours on the clock with my X1c.
Mostly PLA, PETG and ABS/ASA.
A lot in the prototype style or self-made little things.
But also a lot of remix work.
I now have:
2 new cover caps for the extruder, as the magnets keep coming loose,
1 New print bed, but still crooked.
Meanwhile also the second 0.4 mm nozzle, since the first one was simply finished.
I am still very satisfied with the X1c and also with the support from BL, because even if it takes longer, I was always helped.
It’s true that if you talk to the BL employees the way you would like to be spoken to yourself, then it works.
Because the support staff cannot do anything for individual or series problems.
Greetings from the north of Germany,