When asking for help, please provide as much information as possible about your inquiry.
This will help everyone to better understand your problem, and provide you with the best solution.
- Detailed description of the problem
- Printer model used
- Slicer settings used
- Type of filament used
- Photos that clearly show the problem
- .3mf file (if the file can be shared)
- Any potentially useful information that is related to the problem
Having done many fill and cut parts of Opaque Glossy Acrylic Black material, I am finding the contrast of the fill to be getting less over time. Settings have remained the same, as far as I can tell. The parts are not having the same contrast of the white engraving on the black they used to.
The laser is being routinely cleaned and optics checked. I am struggling to find the cause and the correction needed to restore the excellent contrast it has originally.
Is the laser performance deteriorating over time?
Is there a test file to generate a test card for speed vs power with all parameters previously set? I have done this manually but would be great to have a single file for this, provided by the system?