Hi, this is my first entry, I hope to clearly translate my issue to the community to hopefully solve this major issue. I recently discover that the nozzle of my printers have been knocking down pieces and I find out that is a missing solid infill line before the bridge or first layer of the top surfaces, this causes the sparse infill prints in mid-air and without contact with the inner wall.
I have been trying to tune everything to solve this but without any results. I compared the same objects sliced with bambu studio and orca slicer, Im using bambu studio 2.0.2.57 and theres no change between presets and infill variations, it always misses that line that is present in orca slicer.
I only changed the infill so its more clear to understad the issue. I hope this will be covered on upcoming updates because is pretty bad.
Sliced on bambu studio
Sliced on orca slicer
