I have done the nozzle wiper mod from: The Scrubbler: Enhanced X1/P1 Nozzle Wiper - Remix Remixed by Brandon Raineri - MakerWorld.
After checking the clearance and running a print, I noticed that the extruder does not stay above the poop shute after the wipes at the end of the print. I am wondering why this is the case, because for me there always is a small strand left on the nozzle.
I also figured, why scrape the nozzle this close to the printbed when i have the A1 wipers to take care of the nozzle. But will this be sufficient, or is scraping the nozzle close to the printbed really better?
I would like to know where i can change both things in the G-Code. So I can add another wipe and let the extruder stay above the poop shute and remove the scrape above the printbed.
Thanks in advance for your help and insights! I really appreciate any advice or tips you can share to help me better understand and optimize my printer’s G-code.
