Even with the nozzle clumping detection off it still goes to the camera at third layer. really annoying from the fact you can’t fully turn it off.
Processing: IMG_9880.jpeg…
If I’m printing something that is 2 different colors sometimes a color will leave like dots in part of the other color. I have the A1. I sold the A1 mini and never had any problems
I had this issue suddenly a few weeks ago. remembered that i had upgraded bambu studio so I downgraded to v1.8 and that fixed it.
When did the nozzle clumping detection thing change?
I was wondering the same thing because my A1mini just started doing this after the last update too! Pls keep us informed
Replaced heat bed and now is an issue fore me as well A1 Printer! Hope I can figure this out
maybe timelapse or nozzle clump(b) detection? it will go to corner and back
Not knocking anyone but I’d like to understand the thinking that replacing the bed could be the cause of the oozing.
Starting to think that some people replaced the heatbed but possibly didn’t tram it properly and the bed is too low and it looks like it’s oozing.
1 Like
So I had the same issue and what I ended up doing was updating the printer and software, then I ran a self-test on the Bambu Handy app. While it was doing the self-test it did a nozzle pressure test as part of it. Once I did this it stopped oozing out. It was a brand new just opened PLA Elegoo White and now I am running a swatch holder print and it seems to be working just fine for the first print. I was worried that it might be since I am in Hawaii and with the humidity it was affecting it but seems all better now.