No 3D printer yet, but I need advice, Linux

This has already been mentioned here in passing, but I want to reiterate that one can absolutely still use a local network to communicate with the printer, in “LAN Only” mode. Sneaker-netting is not required (but remains an options, along with SFTP for that matter).

–

Not sure which printer you’re considering, but none of the BL printers I know of can connect directly to a computer via USB. Only via a WiFi network.
EDIT: A1 only has an SD card interface (as I now see you’ve noticed).

I suggest researching “LAN mode” or “LAN only” a bit, but it should work for you.

I absolutely recommend installing Bambu Studio and trying it out before buying anything. This is the software you absolutely need to do any printing with your printer (basically), so you’ll be spending a lot of time with it. Orca Slicer may work in some scenarios (depending on printer), but if Studio doesn’t work or you don’t like it, that would be a deal-killer IMHO (Orca is a copy of Studio so the interface if very similar if not identical). Prusa Slicer… maybe but will require a lot of hoop jumping, if that’s even possible (don’t see many users here like that, if any), and same with any other slicer.

Studio and Orca slicers require a special Bambu Lab network “plugin” to be installed before they can communicate with BL printers (they both should prompt you to automatically download & install it when first run). As long as the printer is in “LAN only” mode, this will still preclude any Internet connection requirement, for both Studio and printer. Studio itself has some “cloud” features which can be easily disabled in the prefereces.

–

Some of my previous posts on the subject:
[ Orca Slicer or die! - #643 by MaxThreeD ]
[ Printing without "network plug-in"? - #3 by MaxThreeD ]
[ How does a print get from my PC to my 3D printer? ]

Generic instructions for most/all printers: How to enable LAN Mode on Bambu Lab printers | Bambu Lab Wiki

Cheers,
-Max