When asking for help, please provide as much information as possible about your inquiry.
This will help everyone to better understand your problem, and provide you with the best solution.
- Detailed description of the problem
- Printer model used
- Slicer settings used
- Type of filament used
- Photos that clearly show the problem
- .3mf file (if the file can be shared)
- Any potentially useful information that is related to the problem
I use an A1. Ive been using elegoo pla+ a lot lately. But its happened across various filament changes. Ive attempted to set filament settings up, not deviating too much for what their packaging would say or website says, etc. the problem of tearing up first layer or just general pood adhesion has been very frustrating.
I am having bed adhesion issues like crazy. Wondering how much of it can be related to buildplate maintenance/lack of replacement issues, vs slicer settings that change with updated firmware, or not having my setting dialed in perfectly… its an issue for a few other people i know of too where the nozzle basically tears up the printed first layer on the second pass or if it comes back near any pla already placed, it will often drag that with it. I wash it often and well. Ive tried using bambu labs liquid glue. Just would like general advice and consoling as I’m feeling very defeated. Please help!