I’m wondering if I need to increase the temperature on this white color PLA Basic filament. Once it gets going it prints great but on start-up there always seems a small string that hangs on. This happens between prints not during AMS filament changes.
The info I found on the internet (3dfilamentprofiles.com) contradicted what was recommended on the spool label. The 3d Filament Profiles had the print temperature higher,nozzle 200-260C bed 50-60C. The provided label stated Print temp: 200-210C at 50-100mm/s and 210-240C at 100-200mm/s and bed temp 50-60C. I set it at what the provided label stated Print temp: 200-210C recommended.
More heat?