The grease added should only be present on the sides of the belt, where it touches the idler flanges.
If grease has reached the teeth of the belt, it is recommended to clean it.
1 Like
Is the lube used in the video the one from bbl in the gold packet that says lubricant because I have one from bbl in a silver packet and it says thermal pase and the one in the video uses a silve packet, im so confused any help would be appreciated. Thanks
I followed the instructions from the video using the gold packet, and the noise disappeared. However, I didn’t open the back panel because that would have been too much trouble. Instead, I just opened the top cover by removing the AMS and applied the grease from above using the same technique shown in the video, using a Q-tip with grease.
Should we use the lubrication that you supply us with the ZX rods? Or should we use WD-40?