I am using the BambuLab default profile for the PLA from eSUN as I use exactly this filament.
(Sorry for the German text in my screenshots)
Temperature is 220°C, the filement states that it works between 210 and 230°C.
Adhersion seems to be ok for this model, the print finishes without the object coming loose.
I had also experimented with Retraction (“Rückzug”) and Z-Hop types, but changing those values had no impact on the result.
I have performed a flow dynamics calibration of the filament and entered the corresponding K factor of 0.05.
I will now try to print two of them as you mentioned and post the result.