When asking for help, please provide as much information as possible about your inquiry.
This will help everyone to better understand your problem, and provide you with the best solution.
- Detailed description of the problem
- Printer model used
- Slicer settings used
- Type of filament used
- Photos that clearly show the problem
- .3mf file (if the file can be shared)
- Any potentially useful information that is related to the problem
Hello everyone,
I’m experiencing a strange issue and hope someone here might have an idea.
I’ve printed many lampshades in vase mode before, all with very good quality. I’m using Bambu White PLA Matte. The results have always been clean and smooth.
Now I printed two new models in vase mode, and I’m getting a strange phenomenon (see video). There are sporadic blobs forming on the wall. In the video, you can also see that the model moves slightly at the exact moment this happens.Strangely, it’s not on every layer, but is intermittent.
To troubleshoot, I reprinted an older model with a similar shape that I originally printed over a year ago. The same issue occurred there as well.
The printer is in the same location as before, and the build plate was clean. Since this is happening across different models (including one that previously printed perfectly), I’m unsure whether this is a mechanical issue, extrusion issue, or something else.
Does anyone have an idea what could be causing these random blobs and the brief movement at those spots?
Thanks in advance!
