P1S print issues with back corners

Bambu Lab P Series Troubleshooting
1

When asking for help, please provide as much information as possible about your inquiry.
This will help everyone to better understand your problem, and provide you with the best solution.

  • Detailed description of the problem
  • Printer model used
  • Slicer settings used
  • Type of filament used
  • Photos that clearly show the problem
  • .3mf file (if the file can be shared)
  • Any potentially useful information that is related to the problem

My P1S has problems with the back corner or the print rising of the print bed and making the nozzle hit the print and making the print fail. The printer came with the glass broken but the rest of the printer seamed to print fine until this issue. This is not a code file because the file worked fine on my A1. Any help please

2

Welcome to the forum.

Are you printing with the same filament as with your A1? Different types of filament have different shrinkage and will cause this. Also finger prints on the bed (often on the outer edges) will cause adhesion issues. Cleaning your bed properly is very important.

1 Like
3

Same filiment and the same bed