First time printing Nylon lately. I dried PAHT-CF in my dryer for about 16 hours. I then put it in my AMS, and it printed great. I left the PAHT-CF in my AMS for about a week. My ams stays at 10% humidity and is stored in my home office. But when I went to go print with the same PAHT-CF again toda…

[image] PAHT-CF (PETG, PCTG, hypdroscopic filaments) acceptable humidity Filament In my experience, no, the AMS has a long, sloooow humidity time constant but filament print quality still degrades after some time in the AMS, requiring the filament to be re-dried. But that…

Yes, this is normal. I kept my PAHT-CF in drybox with bunch of silicagel. After 2 weeks, filament is wet and useless - needs redrying. Basically, you have to print it out of drybox or AMS and redry every second day or even once per day. Like some people say, best is to run the filament directly out …

PAHT-CF hygroscopic question

Bambu Filament and Accesories

RocketSled August 21, 2023, 4:15pm 2