Power consumption data

[lkraus]

Power specs and power consumption comparisons with various materials are in the Wiki:
https://wiki.bambulab.com/en/general/power-consumption

I have both 110 and 220 outlets in my shop, so switching X1C voltage is as simple as changing the cord. For a similar forum discussion I ran a quick test:

@lkraus

Started both tests with bed and chamber at 28 °C, set bed to 90 °C, measured time to temp with a stopwatch.

“110” took 6 minutes and 6 seconds.
“220” took about 53 seconds, maybe a second or two less because I looked away and stopped the timer a tad late. The numbers were changing quickly.

… and that was the last time I operated my X1C on 110V.