Ok… so this does not compute
Surface quality issues begin at 30%, very slight but there, 40% is a tad worse, between 45 and 50% overhang everything falls apart. The part looks incredibly bad.
Then something strange happens, we hit 75% and the quality returns, finishing 80% with acceptable quality… haha
80% top and bottom, completely acceptable for printing in literal air.
Now im really confused.
So the issue im having is between 45% and 70% overhangs, anything below is fine, somehow 70 and 80% is fine.
This test I did make some changes in the slicer, they are as shown in the images below. I also set my temperature to 215c instead of 220c.
Ill keep testing but… I think maybe its time to reach out to bambu.
Without being able to get logs from the printer… I cant tell whats going on in these layers. Oh i miss octoprint right now.