Product feedback - spaghetti detection + lightning infill + tree supports

Bambu Lab H2 Series
1

I’m getting false positive spaghetti detection on prints using lightning infill + tree supports more often than i’d like.

one 22 hours print has two false positives. Would merely be annoying, but resuming after the pause can result in the rest of the part being half a millimeter offset from the rest of the print. not great.

Wondering if the retraction during lightning infill needs to be tuned (it does generate some suspicious looking stringing), or if the AI detection could be tuned.

2

What level of spaghetti detection are you set at?

3

I would be using a brush, microfiber cloth and some alcohol on the camera lens and surrounding area. I found some tiny/thin hairs of filament causing problems on my H series.

4

I run my spaghetti detection on medium due to over sensitivity on many prints.

5

Dark or Shiney filaments can easily trigger spaghetti detection, there’s no way to fix it tbh, not with the poor soc inside the printer and not for free…