Project Filament List

Bambu Lab Software Bambu Studio
1

Greetings:

I was search for topics on this but couldn’t find same issue.

Each time I bring a model into Bambu Studio I need to sync before printing. The outside spool is connected to the left nozzle and an AMS is connected to the right nozzle.

Each time I sync, approximately 5 ABS filaments of various colors are added to the project filament list while there are no ABS filaments loaded in the left nozzle or AMS. The colors of the ABS filaments are not the colors of ABS I’ve ever used or have. If I sync again, it will add another 5 ABS filaments and the project filament list gets long.

My only solution is to delete all of the filaments in the list except for one of them that is loaded then it lists the filaments correctly. But, if I print and close down then load the next model and sync, it adds the 5 ABS filaments back in.

I appreciated in suggestions in advance…thanks…john

2

I thought I would provide an update on the synchronize/filament list issue.

I recently updated to the latest Beta version which requirement me to do a new install of Bambu Studio. Now when I synchronize, it maintains the list of filaments I’ve loaded in the AMS and exterior spool but it adds a red ABS filament to the list each time. I’ve never printed with a red ABS before. So, I’m starting to develop a long list of red ABS in the filament list in addition to my loaded filaments.

Any ideas would be greatly appreciated…thanks in advance…John