I have a model where i have painted support material in 2 areas, the model is in petg and the interface in in pla so it does not stick. I also have a high skirt to protect from drafts. The skirt seems to have taken on the support interface material at the same level as the model which i don’t want in case the skirt falls apart while printing. Has anyone got any ideas how to stop it being inserted in to the skirt? I also have a brim to keep the model flat and help with the warping i was getting. I have played around with the brim settings but can’t seem to stop the interface material being printed in the skirt, pla is in orange,
thanks,
Vince
I concur with @RocketSled. You left out a lot of information
I am curious, why did you cut out which printer you’re using in the screen shot? It seems like there’s more that you don’t want to divulge. You’ll find out that if you hold back and force the community to drag answers out of you, the less willing people will be to want to engage.
Nothing has been left out for any reason, a quick check of my bio would have told you I have an A1 which i don’t believe is relevant to having a problem with the slicer. what other relevant information would you require to provide any insight to problem i have outlined?
