So many prints to share. So here are a few of my last prints
7 Likes
Bridges & bicycles ( Penny Farthing String Art) by 3dprintbunny
I love here designs, very useful to learn and understand some aspects of the slicer you use.
Printed on the X1CC, normal speed
Used various materials (PLA,PLA+), brands and colors.
Printed at 0.3mm layer height, if you are using Bambuslicer turn off ‘wipe while retracting’ in your printer settings.
11 Likes
Oooh, they’re great. I’m going to have to give it a try (and I’ve got a remix in mind!)
1 Like
It’s not much, but it’s my first two-color print. Just my personal arms. (Assumed arms… being American we don’t have official heraldry.)
7 Likes
Wow! That stony ring thing… what is that? It looks awesome!
Can you share the STL/3MF please? 
https://www.printables.com/model/7876-rotating-rings-toy
it is a nice print , in my case i use only 10% adaptive cubic infill and 6 top/bothom layers and 2 walls
it got some nice weight to it to , it does not feel like a paper weight but more like aluminium , so it is not to heavy and it still does not feel light , exact perfect for me
enjoy
2 Likes
Without specific settings and with a third-party filament … Awesome …
Printer: X1-Carbon
Filament: GEEETECH Filament PLA 1.75mm for 3D Drucker 1kg Spool, Grün]
Model: → LINK ←
Print settings: Without specific settings, load model and print
Print time: 12h 7m 31s
5 Likes
So many people are sharing their nice prints, but almost nobody has read the first post here
When posting a print, please try to use the following format, as it will make the information more useful for other people that want to replicate the same results.
Pictures with the printed model
Printer used
Filament used
Model link
Print settings
Print time
5 Likes
Printed this snake with my daughter, she painted by herself, had a blast and it also turned out very well!
Laddar upp: 20221101_223555.jpg…
Laddar upp: 20221101_223525.jpg…
Laddar upp: 20221101_223453.jpg…
Bearbetar: 20221101_112954.jpg…
Model is https://www.myminifactory.com/object/card/snake-and-rattlesnake-207183
1 Like
Printer: X1-Carbon
Filament: GEEETECH Filament PLA 1.75mm for 3D Drucker
Model: → Link ←
Print settings: Without specific settings, load model and print
Print time: about 6h 30min
12 Likes
Thank you for posting the right way.
@everyone - Please follow the posting rules in the first post.
5 Likes
My posts were put in here before the suggested guidelines were edited into the first post 
I will edit them.
2 Likes
Hi Ciprian,
where are the rules of the first post?
Link please.
Tony - B
1 Like
Mit PLA die Bäume und den Wasserverteiler in PCTG Fiberlogy
Die Bäume sind von 3dprintbunny auf Thangs.
7 Likes
Printer used: Bambulab X1 Carbon
Filament used: Polymaker PolyTerra, PrimaCreator EasyPrint, Innofil, FormFutura, PrimaCreator Value, all PLA.
Model Link: Printables
Print settings: Nothing special, 0.2mm layer height, 3 walls, 4 bottom layers, 5 top layers.
Print time: about 12 hours in total.
Printer used: Bambulab X1 Carbon
Filament used: PrimaCreator Value, Innofil, Polymaker PolyTerra, PrimaCreator EasyPrint, all PLA.
Model link: Printables
Print settings: Again nothing special, 0.2mm layer height, 3 walls, 4 bottom layers, 5 top layers.
Print time: about 10.5 hours in total.
18 Likes
