TPU Assist module with P2S

Bambu Lab P Series Bambu Lab P2S
1

I’ve not yet started trying to print TPU but I do expect to print quite a few parts so I decided to get the TPU Assist Module for my P2S. This is for a couple of reasons.

  1. I have the AMS2Pro which is mounted on top of the P2S so would be inconvenient to remove every time I want to print TPU
  2. I want the most reliable setup and this seemed the way to go

What I am not clear on is that all the pictures of the setup on the BambuLabs Wiki show pictures of the H or X series so I am not clear on a couple of things.

  • How should I feed in to the back of the printer (as there is only one inlet path)? Should I install a 4-in-1 PTFE Adapter after the TPU Assist Module and after the filament buffer (just before the PTFE tubes go into the back of the printer?
  • Once the TPU Assist Module is connected should it show up in Bambu Studio like the filament buffer, exhaust fan and AMS do?

Thanks for the help.

2

This is a very good mod, I’ve done the H2 equivalent for my H2C.