All my custom filaments are now grayed out as unsupported filament in 2.5, rolling back to 2.3.1 as suggested in Github doesn’t solve the issue for me.
It was 1st reported 4 months ago, please fix it ASAP. Thanks
opened 10:40PM - 19 Nov 25 UTC
bug
### Bambu Studio Version
2.4.0.70
### Where is the application from?
Bambu La… b Official website
### OS version
WIndows 11 25h2
### Additional system information
7950X3D
32gb
4080 Super
### Printer
P1S
### Printer Firmware Version
01.08.01.00
### How to reproduce
Open Bambu Studio.
Go to Project FIlaments and swap filaments
A lot of previous working filaments are now shown as unsupported
### Actual results
A lot of previous working filaments are now shown as unsupported
### Expected results
All my filaments to show up as they were all created with a P1S printer being the only printer I installed in my slicer.
I opened Orca Slicer and all of the filaments show up there correctly. I have also gone ahead and checked the dependencies tab in Orca since Bambu doesnt have that and they are all marked correct to worth with P1S and 0,4mm nozzle.
To test I installed the X1C as printer I own and the profiles not working with the p1s show up there. I do not know if all do but most of them but then the P1S profiles are now unsupported.
I just did a big 12 hour print yesterday with the previous version of the software and no issues at all, all filaments worked fine.
### Project file & Debug log uploads
[debug_network_Wed_Nov_19_22_53_17.log.zip](https://github.com/user-attachments/files/23638584/debug_network_Wed_Nov_19_22_53_17.log.zip)
### Checklist of files to include
- [x] Log file
- [ ] Project file