PLA and PETG filaments detected in the mixture.
Adjust parameters according to the Wiki to ensure
print quality. Click Wiki for help.
And the link doesn’t work! https://wiki.bambulab.com/en/filament-acc/filament/h2d-pla-and-petg-mutual-support
Don’t know if this will help since it says petg-hf
Edit
I notice the h2d reference in the url. Work in progress?
I am not doing support but just mixing petg and pla for now. Not sure what the warning want me to do. maybe I just ignore them.
PLA & PETG won’t stick to each other. Meaning the print will fail.
If your mixing PLA & PETG parts on the same plate, add another plate for each.
Thats exactely the reason why using PLA and PETG together. They stick not to each other.
Thats what support material should do!
1 Like
I ran into this warning today, but cannot figure out why… I am NOT combining PLA & PETG, yet I got the warning. THe print includes 2 filaments & I confirmed the both show PETG as the filament type. Sent to print anyway, so we’ll see what happens in an hour or so, but what could cause this apparently false warning?
Having a mismatch between the slicer & the printer with Non-Bambu filaments.
That’s a good guess, but I confirmed that both studio & the AMS/printer all sows PETG.
BTW… The print came out fine. No surplrises etc.