What are the actual coordinate limits on bed?

JonRaymond · November 12, 2024, 8:57pm

There are a couple community “Bambu” gcode documentation repositories.

jphannifan/x1plus-testing/blob/main/Gcode.md

# Gcode Commands for Bambu X1 Printers


## Overview

This wiki provides documentation over BambuLabs Gcode, specifically for the X1 series. A majority of these commands work on other Bambu devices, but we have not tested on other devices. Several of these commands are being documented for the first time, and please take caution when using them. See below for information on the commands that X1Plus uses. 

## Table of Contents
- [Overview](#overview)
- [Homing and Positioning Commands](#homing)
- [Temperature Control](#temperature-control)
- [Movement Commands](#movement)
  - [Linear Movements](#g0-and-g1)
  - [Arc Movements](#g2-and-g3)
- [Coordinates](#coordinates)
  - [Coordinate system commands](#coordinate-commands)
  - [Useful Coordinates](#useful-coordinates)


## Identifying Gcode format and parameters

This file has been truncated. show original