I purchased my first X1C a few years back. Since then I’ve gotten more X1Cs, P1Ss, 2 H2Ds, and now a H2S Laser combo. Oh and an A1 Mini. I’ve just kind of rotated, upgraded, donated. Every machine I ever purchased is out there going strong still.
I haven’t had any major issues. Biggest issue I’ve had so far was needing to replace a runout sensor on the hotend… which I had busted by accidently cutting the ribbon cable that connects it. Opps. Otherwise though, and despite my utter lack of any real maintenance, they’ve been running well.
I think if you focus on all the voices on the internet, they will give you every reason you need to hate any given product you might be looking into. The world seems to thrive on that sort of drama.
Recently I started looking into pans, and my gawd. The amount of youtubers that will produce videos over which pans to get, why this pan is ■■■■, why you should never buy that pan. Meanwhile, in the real world, most my adult life was using thrift store pans that looked as rough as me after an encounter with my abusive ex.
My cooking has been getting way better. You know, so it’s like I see these shorts talking about how this brand sucks now, and they’re old news, and you need this new pan, and blah blah de blah, meanwhile I’m using the brand of pan they’re trashing and starting to produce some of the best food I’ve ever cooked.
Basically, don’t get too caught up in your own head based on what others are saving. There is no guarantee you wont get a dud, that is one of the unfortunate facts of life. If you obsess over that possibility though, you rob yourself of the joy you could be having.
not sponsored, just like cooking, but you should try Blue Diamond if you have a non-inductive stovetop. Actual industrial diamond coating, and diamond is 3x a better thermal conductor than even copper, 10x better than other coatings. Absolutely wild amounts of heat. cheap too. actually proper application of material science
I’ve just received my P2S after waiting a month. I had a Prusa Mk3/s which is pretty solid. The P2s arrived and was set-up within about 45mins only because I was being careful. It works perfectly right out of the box, print times are amazing compared to Prusa but the technology has moved on.
The biggest difference I found was NO tinkering it just prints, I’ve got 22 hours print time( I know not much, but that’s in 4 days) but have only two failed prints cause I forgot to clean the bed!!!
People generally only post if they have a problem not to praise.
I certainly don’t regret my decision and I hope you don’t either, enjoy.
Well I’ve been 3D printing for about the same time and roughly 2 years ago I bought a P1S and it has been awsome. virtually no issues at all and it’s used almost daily. If I had to make an adverse comment it would be with the daft setup on the nozzle changing. As it happens they have fixed that in the P2S by adopting the quick chagne one from the X1 (I beieve).
I used to have 2 Creality machines but as most people here know they are way down the quality ladder, even with their latest Bambu Knock-offs. Thats all creality can do is copy… (badly)!
If Bambu sold an upgrade for the hotend to the P2S one, I would buy it tomorrow!
I purchased mine in November, got it haven’t been able to print with a .4 nozzle because it came from the factory with the code for an H2D .4 nozzle & everytime I choose it it shows a left & right nozzle in Bambu studio.
Well, I to have had several MK3 series from Prusa, I do currently own 1 X1C, 1 A1, 1 HD2 and 1 H2S, I have to date had zero failed prints on either one of them. They just work, my MK3`s has also worked quite good, but it is not even close to my Bambu printers.
I started years ago with a Makerbot Jr., graduated to a Prusia Mk2S, then went to Ultimaker 3 (dual nozzle extruder). All were good printers in their own right. Now run a Bambu H2D, mainly due to the bigger build plate and 2 separate extruders.
My reason for going Bambu was couldn’t get parts for the Ultimaker (superseeded by new models, dropped support of old ones years after being out of production). And my wife and I just want an ‘appliance’ printer not a tinker and tune.
Whatever printer you are happy with, do that.
My printer loyalty goes to not the ‘cheapest’ but the most time efficient including less ‘support needs’. I don’t do exotic prints or filament, mainly functional and decor for us and friends. Pla or petg are our staples.
P2S is a great printer I am sure, and so is the H2S with mainly a larger build volume. Neither are ‘cheap’, but not unduely expensive.
The snapmaker is intriguing but my wife would shoot me as we don’t have the space for it too.
Make your decision and live with it. Whatever you decide is not ‘wrong’, but like everything, not ‘most optimum’, and that target of most optimum changes as time goes on. Use what you like, and don’t let the religious branding wars get to you.
Adding a data point from a long-time user who doesn’t treat printers as appliances.
I’ve been 3D printing for about 10 years and currently own a Bambu Lab P2S. Personally, I’ve had no serious issues with it—mechanically it’s solid and consistent. That said, I don’t think that should be taken as a blanket guarantee, because I don’t rely on presets or treat the machine as a black box. I tune profiles and approach it as a mechatronic system, not a consumer device.
From what I’ve seen with Bambu Lab launches, the early problems tend to be firmware, calibration behavior, or QC variance rather than fundamental design flaws. Those issues usually get resolved over time. I don’t see the P2S as inherently flawed—more as a tightly integrated, high-speed system that exposes assumptions when users expect Prusa-like behavior at much higher performance levels.
The real distinction, especially given your background, is philosophical. Prusa emphasizes openness, transparency, and long-term serviceability. Bambu emphasizes integration and performance, at the cost of opacity. An engineer can work with either, but some will find Bambu’s closed nature limiting rather than empowering.
So I wouldn’t frame this as a simple reliability question. It’s more about whether you prefer an open, conservative platform you can fully inspect and modify, or a fast, integrated one that rewards hands-on tuning but doesn’t explain itself as generously.
I totally understand your dilemma and I can relate as well. I started with Creality primers years ago and what I learned from them is how to tinker on these printers more then I was printing. After five years of that I finally saw the light and started researching other brands. I’ve been following Frank on YouTube and stumbled on this video: https://youtu.be/q3uGDrHxnC4?si=V8TY5JKw7fDJRS60 thanks to him I got into BL. I got the X1C and P1S. Those printers are work horses. I haven’t had any issues other than a preference/ reacher comfort. Love the X1C interface more than P1S, so started tinkering and modding the P1S with Biqu panda touch and other tweaks to have similar interface. Well, now I have a regular P1S and removed the panda touch from it. I print a lot (at least that’s what I think), well I had these two for over a year now and I printed on them more in first 6 months then I did in the 5 years on the Creality printers. Now that the new line up is released, I’m looking to add the H2C for the multi nozzle and a H2S just because I want to print bigger models, and reduce the waste. When I saw the P2S I’m considering it as well, but I got used to the P1S and it has been working like a charm. I’m always looking at other printers as well and at the price point, BL offers a great bang for your buck. Check out Frank’s video on the P2S: https://youtu.be/AbJxnEwgNBM?si=qwZjj1YUp7z_TtL_ if it had a bigger bed than the 256^3, I would be getting it my self.
I think it will be a great printer for you to get into after the MK3. As well the BL customer support is great.
Started with an ender 3 S1 pro In 2020. Saw the X1C (early 2021) and had to take the plunge, no regrets. Added P1S, Kobra Max, and at the same time added another X1C and HD2. Worked the first X1C pretty hard (sorry, hours not here while I write) and lost the laser which effected nothing. Each machine is dedicated to a specific need at this time (dual colors only, TPU, production runs, prototyping and engineering filaments). My first X1C has .6 nozzle for TPU primarily, prototyping, and larger layer lines. My HD2 was severely damaged (Yay, FedEx) but I chose to keep it, work with Bambu Lab to repair and it’s been great thus far. I held off on the XL as I like Prusa’s background and history but the cost and issues with this machine had me hold off on ordering one. I recently (Early December) Pre-ordered (April -May delivery) the U1 Snapmaker as it is what’s coming with future printers and fits a new need for customer requests. A time analysis on various former runs on the 3 different types of printers helped with that decision. The U1 makes these requested projects more profitable for me. I just ust hope it will hold up as well as my Bambu Lab printers. That all said the PS2 is basically the X1C and if it is anything like my personal experience with the past printers I’ve purchased I feel you will not be disappointed with the PS2. Only other issue I have had is an issue with second X1C. After running a part(s) I have to exit the slicer and reopen it and also turn off, then back on my printer. Failure to do so will cause the new file being sent to just hang for a long time trying to to send it to the printer, not sure why. Hope this may be helpful.
Retired, also. I have a bunch of 3d printers to keep my mind busy at this age. Prusas, Bambu Lab, Snapmaker, FLSun, Elegoo, AnyCubic, and Sovol. The Prusa and Bambu Lab printers have just been workhorses producing quality prints. The others are pretty new so I reserve my opinion just saying they’ve performed pretty well. Only the Sovol brand didn’t meet expectations with constant lost MCU connections. The decision is yours, but I feel confident the Bambu Lab P2S would be a very good printer. If it were me, I would not cancel. I would have a working P2-S printer and be upgrading that Mk-3S to a Mk-4S so I could convert it to a Core One +. I’ve just finished two Core One + conversions and really enjoyed every minute.
I got a P1S a couple months ago, the toolhead was loose on the rails leading to poor print quality. Literally 2 days after emailing Bambu and showing them the damage, they sent a replacement XY gantry free of cost all the way to Alaska. They seem very willing to help with any issues at all, and so far i’ve been really happy with my P1S after the quality issue fix. (though i came off a Ender 3v2 so i don’t have anything else good to compare it with)
I’ll chime in with the “Don’t cancel your order” group.
They are solid machines.
And especially since you’ve cut your teeth on the Mk3*, you’ve got the background in how these machines work.
The big change will immediately be the print speed. What took days, takes hours now. And what took hours, takes minutes now. But with that speed comes artifacts that you didn’t have before because you were printing at a snail’s pace by comparison. So you’ll have to make some choice’s between speed and quality as you go along.
And as I discovered, and especially now with the super quick nozzle changing, you can go up a nozzle size, to a .6mm, and gain even more time without sacrificing much in surface quality.
And the price of the P2S is just ridiculous compared to the Core One at this point.
And I really think you enjoy the BL Studio/Orca workflow better than Prusa Slicer which to me is still a little kludgy.
Oh, and keep in mind that BL Studio presets are built for speed above all else. So, always check the flowrate and speed screens when you’re looking at the slice preview. In those views, you’ll see where you may have to slow things down to get better surface quality.
The more you read on social media about anything the more you will think its bad, so stop.
90% of media and forum posts are the same, what’s wrong. There’s a saying, do something right nobody remembers, do something wrong no one forgets. All the “issues” you mention, and for any product are all you will read, compared to how many positive experiences there are.
I never know what people are looking for when they post stuff like this, do you want persuading, freebies, grovelling or what? Its your choice, we cant make it for you, the mere fact we are on this forum proves we mostly like the product, so probably bias. But its a little pointless as this post says you’ve already decided.
Bambu Labs zijn fijne printers zeker voor beginners, uitpakken installeren en binnen half uur draait hij je benchy. Ik ben begonnen met een A1-mini, hiermee heb ik werkelijk niet 1 probleem gehad. Toen een A1 met AMS, printer zelf geen problemen, maar de AMS-lite wel. ruim 2 maanden mee bezig geweest voor ik slot 4 weer aan de praat had, diverse onderdelen zijn door BL geleverd onder garantie. BL gaat er vanuit dat je zelf de onderdelen kunt vervangen, de wiki is zo uitgebreid en gedetaileerd dat echt iedereen met een gezond verstand dit kan. Goed de mini en A1 verkocht en naar een P1S gegaan met de AMS2-pro Een wereld van verschil met de A1, veel stabieler omdat het printbed niet meer beweegt en natuurlijk omdat het een gesloten systeem is. De AMS werkt ook perfect, alleen de droogfunctie moet je met een korreltje zout nemen. Het is OF printen OF drogen, ga je drogen dan haal je ook het filament uit de feeders. De AMS draait zelf om de x minuten de rol om zo gelijkmatiger te drogen. Het drogen van PLA en PETG heb ik geen enkel probleem mee ondervonden. Hardere filamenten zoals ABS en ASA zou ik niet hierin drogen, de temperatuur bereikt niet de waarde die nodig is om dit te drogen. Verder is de AMS geschikt voor TPU, maar echter alleen die waarbij staat dat het in een AMS mag. Zolas je wellicht weet is TPU te zacht voor doorvoer door de AMS. Tenslotte de P2S erbij gekocht met nog 2x de AMS2-pro en nu in die opstelling werk ik ermee. De Versie 2 is wel veel gevoeliger voor een goede kamertemperatuur (printkamer) ABS ging nogal eens loslaten van het bed. Nu ik een aparte kamerverwarmer heb geinstalleerd en voor ik start met ABS deze opstook tot 75 graden gaat het perfect. Dan in het algemeen over BL. verkoop gaat vlekkeloos. Alles komt keurig aan hoewel het logistiek wel beter zou kunnen. in een combinatie-bestelling komt het geheid aan op verschillende dagen en verschillende vervoerders. Als er iets is kan je heel makkelijk een ticket openen en je probleem uitleggen. Voeg er dan meteen beeldmateriaal bij, fotos filmpjes etc. daar vragen ze anders toch meteen naar. Ze geven je de oplossing en als dat nodig is de onderdelen erbij, meteen een link naar de de-montage. Normaal reageert support na ongeveer 3 dagen op je eerste ticket. Daarna gaat het sneller door het proces heen. Ik zou je aanraden om de P2S aan te schaffen, hij is betrouwbaar en veel slimmer dan de P1S. Het prijsverschil is niet zo groot dat dit een issue kan zijn. Hou me ten goede als je X bedrag te besteden hebt kun je geen X + 100 euro uitgeven.
Ik hoop je met dit verhaal een beetje geholpen te hebben in je besluit. Veel wijsheid toegewenst en laat nogeens weten wat het geworden is en hoe het bevalt.
My P2S arrived the other day. I have been spending lots of time getting to know the software, interface and doing a complete pre-print inspection. I’ve spent the week before it arrived printing a riser, poop chute, dry boxes for the AMS and a bunch of smaller items (on the Prusa, since the P2S wasn’t here yet).
Today, I ran a couple simple PLA prints. All good. My initial impression is good so far. It’s faster than the MK3S and print quality was as good as the Prusa. That is a high compliment since I’ve done a ton of tuning to the MK3S. Everything from print profiles that are 50% faster than stock to bed leveling that is so close to perfect its silly. So, right out of the box, the P2S is good. Next up is PETG. That’s my go to filament for most of the things I print. Then on to ASA and TPU. Things that were either very challenging or downright not worth the trouble on the Prusa.
So for now I can say I’m happy with my decision. The P2S has been good on day 1 of printing. Im hoping it continues to impress me over the next week.
Just an additional data point:
I switched to P2S over a month ago from an old Polaroid Playsmart printer.
I have 38 hours printtime with PLA and PETG on Textured and smooth plate. Zero problems so far.
I have had my P2S for almost a month, 200 hours, lots of little prints, Riser, AMS dry boxes. PLA+, Silk and PETG all great prints in Textured and Cool Plate Suoer Tack. Inky issue is the new update in a MacBook.