A1 is high centered on the Printer Frame

Bambu Lab A1 Series Troubleshooting
1

I got my A1 a couple days ago, and everything seems to be working great.

But today i was installing the top mount AMS and printer frame stiffeners and i noticed that my printer rocks forward and back.

The printer is high centered on the Printer Frame Feet.
The front two bottom base assembly feet touch the ground, then the printer frame feet in the middle, and the rear two feet of the bottom base assembly are floating off the ground. Kind of like a teeter totter. Everything seems to be installed correctly and the printer frame and bottom base assembly line up perfectly.

Hoping someone has some ideas?

2

First check there’s nothing under it like a random screw or whatever.
Then check if the foam feet are on the bottom of the machine.
Also check your frame braces, i found one that didn’t have the pop in feet. in fact it has no extra feet & i bought silicone bumpers [10x10x5] to put on.
If that fails, uninstall whatever you put on & reinstall 1 part at a time, test to see if stable, then move on to next piece. Maybe something was warped or had rough edges that aren’t highly noticible.