My A1 mini started to make strange noises today. The printer is 3 weeks old and worked without a flaw until today. I’ve attached two video’s, each one with their own issue. Issue one: when printing the printer makes this noise when moving the bed (only when moving backwards) It goes away after a fe…

It could be that that there is a piece of filament inside where the beds motor is

So I have to open the bottom? Doesn’t this void warranty?

[image] Bigdom0: My A1 mini Vibrates before printing because If you mean the 2 minutes at the beginning of a print: YES. That is the vibration calibration. To be precise, the compensation of vibrations.

@Barktus I have a thread around here somewhere where I had to remove the bed in order to remove a tick filament ball…but ■■■■ if I can find it anywhere. Unless you see something jammed under that gray plastic piece under the bed on the left side, you shouldn’t have to do all that. Removing the sc…

No there isn’t anything under there. I have tried multiple things. The sound got away, but I now has a y-axis vibration error that won’t go. Even after tensioning the belt multiple times and calibrating it again. So I’ve resorted to make a ticket, in hope this can be fixed.

Found it: [image] Had Poop Stuck In Bed Rail Bambu Lab A1 mini Well, I was wondering about this…I wonder no more. Not something I want to do all the time, but not too difficult. I was just looking at the pics on Wiki & got stuck, answer was at the end of the…

A1 mini making strange noises

Bambu Lab A Series Troubleshooting

lion7718 January 25, 2026, 4:49am 9

Found it: