A1 (not Mini) Footprint

Bambu Lab A1 Series
1

Thinking about purchase of an A1 (not Mini) which would need to fit sideways on a shelf with little depth (40cm).
All I could find in the FAQ was the drawing which includes the protrusions on both sides, but not the measurement of the base including the camera fixture (see picture below, marked “???”). This seems to be the least space required with accepting some overhang.
Could someone kindly take this measurement and post?

Bambu Labs A1 Space Required
Bambu Labs A1 Space Required1134×780 55.4 KB

2

Not sure how precise you need it; my rough measurements suggest around 420mm? see photos.

close-up
close-up800×1068 186 KB

measurement
measurement1892×1384 108 KB

3

Thank you, exactly what I was looking for!

4

Could you measure the depth too? I’m trying to understand if I can fit it in my shelf but I don’t find precise information about that, my shelf mesures about 39 cm depth and I would like not to put the printer sideways. Thankyou in advance ^^

5

Are people not looking at the tech specs on the product page anymore?

Also whatever people measure and tell you, is wrong, that because the bed has to move back and forth. Only take advices from Bambu lab instructions, which is minimum of this

image
image889×767 69.4 KB

1 Like