AMS 2 Pro randomly unable to feed filament into the extruder error

[klumos]

On the H2D I have started randomly getting on multi-color prints Unable to feed filament into the extruder. The AMS may be mistached with the extruder. This has happened in multiple slots, with different brands. I can pull the filament back up, it feels like the ams gear has eaten into the filament lol. I can cut it off, refeed and it is fine for a bit then does it again. It has been doing it the most with Sunlu PLA, but has also done it with others as well.

Anyone else had this happen?

[redwards2k]

There’s a whole thread on it which seems to be the same problem you are having

AMS 2 Pro - Issues with loading filament into Extruder

This might have fixed my issue - the 35 degree guide so far has made multiple load and unloads work. Testing a 6hr colour changing torture test now… Edit: model printed great, 89 successful changes! If you are having issues, the guide print is well worth 20 mins of time to see if it helps.