Well, a week a go I was trying to print a 3D squared box with rounded borders. At the beginning everything was working right. So, I went for a walk for about 1 hour. When I came back, I found 3D print had failed. The hotend could not pass a border, created due to print error, and it was going up and…

[image] A1 Mini & A1 Users: Solved: Screw fell out of toolhead Bambu Lab A1 mini I’ve seen a few posts here & doing a Google search over the weekend after it happened to me. I noticed my first layer was bad, tramming the bed didn’t fix it. I changed the Z-Off…

Maybe that screw is at the back side of the heat block. There are 4 screws at the back side.

Thanks for this, cannot believe I’ve been trying to fix this for weeks and it turns out to be 4 hidden screws. Thanks again.

Thank you for the tips. I tried them all but still striking out. Attempting a firmware rollback because that is when my problems started on both the A1mini and p1s. The hunt continues.

Are you having issues with first layer (Heat Block) solved

Bambu Lab A Series Bambu Lab A1 mini

lion7718 November 8, 2024, 12:18am 2