Hello Colleagues,
I have some problem with my print. I am printing a pencils organizer with PLA+ esun on standard 0.2 profile in bambulab studio slicer. The problem appears also on PLA basic bambu filament (green) - attached to my X1C. I am newbie in bambu printer becosue I already started 2 weeks ago. Below you can see the pictures of my print which looks badly on walls of septumums (barriers) - it looks something like badly bridging / overextruding and also appers some stringings.
Is there any way to improve the quality of a walls?
I tried several thing:
- I reduced the nozzle temp from std 220 deg.C to 205 deg.C (that improved the stringing a litter bit),
- I also dryied my filmanet (12h) inside X1C, but that no help at all (the same problems still availible)
- I also tryied to reduce the travel speed and accelaration speed about 50% but this also not help.
What is strange is that some walls (selected on green marked on picture) are fine - there are located in the middle of the print
Can I ask you for support for figgerout the problem?