Cannot get P1P to show up in Lan only mode

Bambu Lab P1 Series Troubleshooting
1

I have an X1C and 4 P1P printers. Recently I experienced an internet outage and I thought “no problem, I’ll just use lan only mode through my home network.” Uh…no

I have been able to get the X1C and one of the P1Ps to show up and be able to print from Orca Slicer, but for the life of me I cannot get the other 3 P1Ps to connect. Sometimes they aren’t in the list at all. Other times the printers will show up be be grayed out and unreachable. The instructions around lan only mode are woefully inadequate.

Anyone have ideas I can try? It’s rather frustrating to not be able to use these machines simply because the internet is not working. I know I could use an SD card but who wants to do that?

2

It turns out all I had to do was power off the printer after setting to Lan only mode, and power back on. If that’s not written down somewhere it should be.

1 Like