Different types of the Engineering- and Cool-Plate?

Bambu Filament and Accesories
1

Hey,
I recived my X1CC, with it came the regular Engineering Plate with the Cool-Plate-Sticker.

For the Cool-Plate it says only: PLA
For the Engineering-Plate it says: PETG/ABS/TPU/PA/PC

So far so good.

But I also orderd a seperate Cool-Plate from the Store an this one is totally different:

For the Cool-Plate it says: PLA/PETG/ABS
For the Engineering-Plate it says: PA/TPU/PC

They also have different QR-Codes.

Also the Cool-Plate-Sticker is more greyish. Here are two pictures:
right is from the Printer, left from the store.

DSC07632
DSC076321920×1054 39.6 KB

DSC07634
DSC076341920×1016 32.9 KB

Just wondering, if they changed things, and there are some more infos about this, as I couldn’t find anything on the wiki, there it still says the Cool-Plate is not suited for PETG and ABS.

:thinking:

MfG Christian

2

Yes, they changed the recommendations for the cool plate as PETG and ABS need a higher bed temp than the cool plate sticker can take reliably. Old stock on the steel sheets still had the old labeling, but Studio was updated to not allow you to print high-temp filaments on the cool plate.

3 Likes