Documentation inconsistencies in latest Bambu Studio / wiki

Bambu Lab Software Bambu Studio
1

I thought I’d point out a couple of small inconsistencies in the current wiki + software:

  • in the wiki outline guide for Bambu Studio, in the table there is an entry for “How to perform Dynamic Flow Calibration” but this links to an older page on Extrusion Calibration last updated in January. To get to the new page on flow calibration, I had to click on the link in the Calibration tab in Bambu Studio 1.7.1.62
  • in the wiki, if you are inside of the Bambu Studio documentation and then try to click on Bambu Studio in the “breadcrumbs” at the top of the page, you hit a red 404 screen.

Screenshot 2023-08-02 at 11.29.39
Screenshot 2023-08-02 at 11.29.391560×1178 164 KB

Both of these are relatively minor issues but I thought I’d report them the experience can be polished some more :slight_smile:

2

Yes they are minor, but for a new person, not confusing the issue is important (me for example). So thanks. :+1:

1 Like