ELEGOO Rapid PETG Filament

Bambu Lab A1 Series
105

What are people using for RETRACTION settings for Elegoo Rapid PETG on the A1 (0.4 Steel Nozzle)? I’m using a modified version of the filament profile that was mentioned at the top of this thread (with a couple tweaks) and for the most part it’s been working quite well. I don’t believe I’ve adjusted the retraction settings nor have I added any filament profile overrides to these (my values are attached):

Retraction Settings
Retraction Settings1524×1234 146 KB

However, I’m now trying to print desiccant containers which have a small grid pattern and am finding that stringing is occurring in the grids which obviously will reduce air flow and I’d like to try to reduce it if possible.

106

hello guys, sorry for taking so long to answer, I was out of town for the holidays. I fixed the problem and the profiles are back up! Sorry for the trouble :frowning:

107

I already used about 15Kg (Grey, White, Black, Orange, Red, Blue) with my A1-Mini and I’m quite satisfied. All colours worked fine.

BUT
I still have problems with warping when printing big parts.
Reduced the max fan speed for Part cooling fan to 30%

flow ratio.95,
K value to .030
max volumetric speed to 24.

Textured PEI Plate to 70°C
Nozzle 230°C