Extreme Ghost(?) problem

Bambu Lab P1 Series Troubleshooting
1

Hi guys!

Over the last week my p1p has been driving me crazy. See the 2 pictures below:

PXL_20240221_082033276
PXL_20240221_0820332761920×1446 110 KB

PXL_20240221_082121574
PXL_20240221_0821215741920×2550 172 KB

The first was printed today, the second a month ago. Same conditions, same dried material Bambu PLA Matte. How can I solve this problem? I also tried printing the same model on x1c and it is perfect…

2

Welcome to the forum.

Have you tried cleaning the carbon rods and lubricating the steel ones?

https://wiki.bambulab.com/en/p1/maintenance/p1p-maintenance

2 Likes
3

Yes, I have done all the maintenance procedures, I have tensioned the belts, I have even calibrated the z with the gauge, I have done all the automatic and manual calibrations on bambu studio and orca slicer but nothing changes… i also changed the hotend and the ptfe tubes… i just don’t know how to solve this problem :frowning:

4

Honestly looks kinda nice with a “matte” finish :skull: