Feature request: more onboard speed adjustment settings

Bambu Lab A1 Series General Discussions
1

I know some people think these settings are gimmicky but I found them to be pretty useful in certain situations. Mainly when printing something that I realize needs to be slowed down midprint, or also sometimes when I’m printing something that is printing really easily at 100% and I bump it up to 124 or even 166 midprint.

In particular I would be interested in a 75% option. 50% is just slower than I need sometimes and I’m sure it would print fine a bit faster. I don’t think we need to fine grain control but one or two options between 50 and 100 would be nice and even a slower than 50 option.

5 Likes
2

I second this!!! I would love to see more options here. I would also like a automatic slicer settings for the “silent mode” that way i can simply enable it on the slicer and not manually do it at the printer. I will likely just make my own “silent” slicer settings and default to those!

3

its 50% reduction on speed.
So if your slicer settings are 220mm/s it’ll drop to 110mm/s.

Not sure if acceleration is slowed, if so, half all them also, save it as a “Silent” profile.

4

The real advantage of the onboard speed setting though is the ability to adjust speed mid-print.